LSR/20 LIQUID STAIN REMOVER

LSR/20 contains a proprietary mesh protector. *Before using, remove all ink residue and emulsion from the screen. WET APPLICATION: Brush LSR/20 on both sides of screen, allow to dwell 1-3 minutes, then high pressure rinse starting from the bottom of the screen to the top on the print side of the screen. Repeat high pressure rinse on the reverse side. Apply a degreaser and remove by a low pressure flood rinse to both sides of the screen. If residual stain is present, use dry application method. DRY APPLICATION: Brush LSR/20 on a completely dry screen and allow product to dry. Reactivate LSR/20 by applying a CCI screen wash. (Contact your CCI sales representitive for proper product reccommendation). Agitate by brushing in a screen wash on both sides of screen until dried product is dissolved. High pressure rinse both side of screen, starting from the bottom to the top. Apply a CCI degreaser and remove by low pressure flood rinsing both sides of screen. AVAILABLE PACK SIZES: 4X1 QT. (CASE) | 5 GAL.